C and D machinery - Home
About Us
Products
Rubber Tracks
Machinery Sales
Contact Us
Gehl 40 Series Skidsteer Loaders C and D Machinery - Rubber Tracks

A larger operator compartment with clear side and rear sight lines gives operators full, extended views for increased safety. New high-back adjustable padded seat improves comfort. suspension seat and factory-equipped air conditioning/heater system are available options. Dual Hand Controls and Hand/Foot Controls available
T-Bar 'Hands-Only' Controls ROPS/FOPS (Level II) for extra operator protection. Grid section and window in roof provide excellent bucket visibility at full height. Adjustable operator restraint bar offers secondary protection and serves as a padded armrest. Lockout system shuts down lift/tilt functions when optional front door is opened. T-bar 'hands-only' dual-hand or hand/foot controls to match any operator's preference.
All-New Appearance One look and you'll see that the 40 Series is built for efficiency. The patented Powerview® lift arm offers excellent operator visibility. And Super Hi-power drive chains feature heavy, high-strength construction, designed to stand up to rugged conditions. model 6640

Specifications

All dimensions are in inches (millimeters) unless otherwise noted
4640, 4840, 5640 and 6640 specifications

4640 4840 5640 6640
A. Overall Operation Height
     (fully raised)		 149
(3785)		 149
(3785)		 162
(4115)		 168.3
(4274)
B. Height to Hinge Pin
      (fully raised)		 115.5
(2934)
 115.5
(2934)		 123
(3124)		 124.3
(3157)
C. Overall Height w/
     ROPS/FOPS Cab		 78.0
(1981)		 78.0
(1981)		 81.0
(2057)		 82.0
(2082)
D. Ground Clearance 7.5
(191)		 7.5
(191)		 8.0
(2057)		 9.1
(231)
E. Overall Length 122.8
(3119)
(w/66"
bucket)		 126.3
(3208)
(w/66"
bucket)		 131.0
(3327)
(w/70"
bucket)		 141.5
(3594)
(w/74"
bucket)
F. Overall Length
     (less bucket)		 89.8
(2291)		 93.3
(2370)		 95.5
(2426)		 101.0
(2565)
G. Wheel Base 37.5
(953)		 41.5
(1054)		 42.5
(1080)		 48.4
(1219)
H. Dump Reach
     (at full height)		 27.6
(701)		 27.6
(701)		 32.8
(833)		 34.3
(863)
I. Rollback at Ground 27° 27° 30° 30°
J. Dump Angle 40° 40° 40° 40°
K. Overall Width 63.5
(1613)		 63.5
(1613)		 67.0
(1702)		 72.5
(1841)
L. Bucket Width 66-72
(1679-1829)		 66-75
(1679-1905)		 70-90
(1778-2286)		 74-90
(1880-2286)
M. Clearance Circle (Rear) 59.5
(1513)		 61.5
(1562)		 66.0
(1679)		 69.0
(1753)
N. Clearance Circle
    (Front less bucket)		 47
(1194)		 48
(1219)		 50.5
(1283)		 54.0
(1372)
O. Clearance Circle
    (Front w/bucket)		 74.5
(1892)		 76.0
(1930)		 82.0
(2083)		 90.5
(2299)
P. Seat to Ground Height 37.5
(953)		 37.5
(953)		 42.0
(1067)		 43.3
(1100)
Q. Rollback at Full Height 86° 86° 84° 84°
R. Dump Height 89.5
(2273)		 89.5
(2273)		 93.5
(2375)		 94.8
(2408)
S. Departure Angle 25° 25° 26° 29°
All measurements with flotation tires and dirt/construction bucket.

4640 4840 5640 6640
ENGINE
Make Deutz(A) Deutz Deutz(B) Deutz
Model F3M2011
BF3M2011		 F4M2011 F4M2011
BF4M2011		 BF4M2011
Net hp (kW)@ RPM 46/60
(34/45)
@ 2600		 60
(45)
@ 2500		 60/82
(45/61)
@2500		 82
(61)
@2500
Displacement (L) 142 cu. in.
(2.3)		 190 cu. in.
(3.1)		 190 cu. in.
(3.1)		 190 cu. in.
(3.1)
 
HYDRAULIC SYSTEM
T-bar Hand Controls, Hand/Foot Controls or Dual-Hand Controls Traction/
Lift/Tilt		 Traction/
Lift/Tilt		 Traction/
Lift/Tilt		 Traction/
Lift/Tilt
Auxiliary Hyd. (L/min) 19 gpm
(72)		 19 gpm
(72)		 23 gpm
(87.1)		 23 gpm
(87.1)
High-Flow Hyd. (L/min) - option 30 gpm
(114)		 30 gpm
(114)		 36 gpm
(136.3)		 36 gpm
(136.3)
Filtration 3 micron 3 micron 3 micron 3 micron
Reservoir Capacity (L) 12 gal. (45) 12 gal. (45) 16 gal. (60) 16 gal. (60)
 
ELECTRICAL SYSTEM
Battery 12 volt
(950 CCA)		 12 volt
(950 CCA)		 12 volt
(950 CCA)		 12 volt
(950 CCA)
Starter (kW) 12-volt (2.3) 12-volt (2.3) 12-volt (2.3) 12-volt (2.3)
Alternator 95 amp 95 amp 95 amp 95 amp
 
CAPACITIES/WEIGHTS
SAE Rated Operating Load (kg)(C) 1500 lbs
(680)		 1700 lbs
(771		 2000 lbs
(907)		 2400 lbs
(1089)
Rated Operating Load
w/ Opt. Counterweight (kg)(C)		 1650 lbs
(748)		 1850 lbs
(839)		 2300 lbs
(1043)		 2700 lbs
(1224)
Tipping Capacity (kg)(C) 3000 lbs
(1361)		 3400 lbs
(1542)		 4000 lbs
(1814)		 4800 lbs
(2177)
Fuel Tank (L) 15 gal
(56)		 15 gal
(56)		 19 gal
(72)		 24 gal
(91)
Travel Speed (kmh) 0-8.1 mph
(0-13)		 0-8.1 mph
(0-13)
0-11.4 mph
(0-18.3)(D)		 0-8.4 mph
(0-13.5)
0-12.5 mph
(0-20)(D)		 0-8.4 mph
(0-13.5)
0-12.5 mph
(0-20)(D)
Operating Weight (kg)(E) 6200 lbs
(2812)		 6480 lbs
(2939)		 7380 lbs
(3347)		 7800 lbs
(3538)
 
FEATURED EQUIPMENT
Auxiliary Front Hydraulics Yes Yes Yes Yes
Brake Control
(auto/manual)		 Yes Yes Yes Yes
Engine Heater Opt. Opt. Opt. Opt.
Foot & Hand Throttle Yes(F) Yes(F) Yes(F) Yes(F)
Anti-Vandalism Protection Yes Yes Yes Yes
Full Instrumentation Yes Yes Yes Yes
T-Bar Hand Controls Available Yes Yes Yes Yes
Hand/Foot Controls Available Yes Yes Yes Yes
Dual Hand Controls Available Yes Yes Yes Yes
Hourmeter Yes Yes Yes Yes
Hydraloctrademark_small_2.gif (124 bytes) System Yes Yes Yes Yes
Hydrostatic Drive Yes Yes Yes Yes
Independent Hydraulic Reservoir Yes Yes Yes Yes
Integral Access Plate (removable) Yes Yes Yes Yes
Lift Arm Support Devicec Yes Yes Yes Yes
Operational Lights - Front and Rear Yes Yes Yes Yes
Operator Restraint Bar/Seat Belt With Padded Armrests Yes Yes Yes Yes
Engine Auto-Shutdown System Yes Yes Yes Yes
All-Tachtrademark_small_2.gif (124 bytes) Attachment Mounting Yes Yes Yes Yes
ROPS/FOPS Level II Approved Overhead Guard (w/integral side screens) Yes Yes Yes Yes
Self-Leveling Lift Action Yes Yes Yes Yes
Sound Reduction Package Yes Yes Yes Yes
Spark Arrestor Muffler Yes Yes Yes(G) No

(A) 4640 turbo versions use Deutz BF3M2011 Turbo engine -60 hp. (E) All base units with std. equipment, tires, bucket and 175 lb. (79kg) operator..
(B) 5640 turbo versions use Deutz BF4M2011 Turbo engine - 82 hp. (F) Foot throttle is standard on T-Bar and Dual-Hand control versions.
(C) Per SAE J818 and J732. (G) Naturally aspirated engines have spark-arrestor mufflers.
(D) With2-speed drive option.

Gehl reserves the right to make changes in specifications shown or add
improvements at any time without notice or obligation.

 

[Home][Tracks ][Machinery Sales][Machinery Hire ][Contact Us]

Site by Anderson Web Design
© Alamall Pty Ltd