C and D Machinery - supply of machinery tracks, rubber pads and steel tracks for earthmoving equipment. We can ship tracks throughout Australia and the rest of the world. Sales and Hire of machinery.

Gehl 3635 Skidsteer

Standard Equipment

All Tach^TM Attachment System (Universal-Style)
ROPS-FOPS Level II approved overhead guard
Operator restraint bar with armrests
Power View^TMBoom Load Arm
Mechanical lift cylinder lock
Vandalism lock provisions on rear engine cover/door
Dual-lift/tilt cylinders with Nitrosteel^TMcylinder rods
Battery charge indicator
Foot & Hand throttle (Hand control units only)
Hydraloc^TMSystem – Brakes & interlock for starter, lift, tilt cylinders & wheel drives
Zero maintenance axles
Entry/exit grab handles
Warranty – 12 months

With the model 3635 you get excellent fuel efficiency, lower noise levels than previous models and high breakout forces. A naturally-aspirated, high-torque engine puts out 36 hp with top speeds up to 7 mph.

A narrow frame provides unmatched maneuverability, allowing the 3635 to go almost anywhere

GENERAL*
Overall Operation Height – fully raised (mm)	139.8” (3550)
Height to hinge pin – fully raised (mm)	108.1” (2476)
Overall height with operator guard (mm)	70.3” (1784)
Ground clearance to chassis – between wheels (mm)	6” (152)
Overall length (mm)	114” (2896) w/54” bucket
Overall length – less bucket (mm)	88” (2235)
Wheel base (mm)	34.4” (874)
Dump reach – Full height (mm)	22.8” (578)
Rollback at ground	28°
Dump angle – Full height	36°
Overall width – Less bucket (Tire in/Tires out position) (mm)	48”/58” (1226/1475)
Bucket width (mm)	54” (1372)
Clearance circle – rear (mm)	52.9” (1344)
Clearance circle – front less bucket (mm)	42” (1067)
Clearance circle – front with bucket (mm)	68.7” (1745)
Seat to ground height (mm)	33” (838)
Rollback at full height	100°
Dump height (mm)	84.5” (2146)
Departure angle	23°
Tires	8.50x15

ENGINE
Make	Yanmar
Model	3TNV88
Net power @ rpm (kW)	36 hp (27) @ 3000
Displacement (L)	100 cu.in. (1.64)

HYDRAULIC SYSTEM
T-bar Hand controls, Hand/Foot controls,or Dual-Hand controls	Traction/Lift/Tilt
Auxiliary hydraulics (L/min)	14.4 gpm (55)
Filtration	7 micron
Reservoir capacity (L)	8 gal. (30.3)

ELECTRICAL SYSTEM
Battery	12-Volt (675 CCA)
Starter	12-Volt
Alternator	40-amp

CAPACITIES/WEIGHTS
SAE Rated operating load (kg)	1050 lbs. (476)
SAE Rated operating load w/optional weight kit (kg)	1150 lbs. (522)
Fuel tank (L)	8.5 gal. (32.2)
Travel speed (km/h)	0-7 mph (0-11)
Operating weight (kg)**	4400 lbs. (1996)

* All measurements w/std. flotation tires & std. dirt bucket
** Base units w/std. equipment, tires, bucket & 175 lb. (79 kg) operator
SAFETY IS NO ACCIDENT. Gehl Company reminds users to read and understand the operator’s manual before operating any piece of equipment. Additionally, be sure all safety devices and shields are securely in place and functioning properly. Gehl Company reserves the right to make changes in design or specifications at any time without notice or obligation.